Skip to content
-
-
- Copy Stands and Lighting Equipment, R1 System, Stands: Components and Accessories
-
- Wide and extremely vibration-resistant column of aluminium tubing with dull black anodized surface and cm and inch scales. With mount and fastening mechanism for camera arms and for lower part enlarger head KA4568. Height adjustment by hand crank. Cross-sectional dimensions of the column: 70 x 35 mm (2.8 x 1.4 in.) Height adjusted by friction gear with plastic bearings, weight…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- Consisting of two vertical arms, each with crossbar and clamp base. Flash/Light Fixtures (5581), for example, can be attached to the lamp arms, which are adjustable in height and angle. These flash/light fixtures are suitable for fastening conventional flashes and lights with accessory foot or 1/4” mounting thread. Vertical arms with height markings, tiltable with detents. Mounted with strong cast…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- LED daylight lighting unit with two light banks for even and soft illumination. Emitted light has absolutely no IR and UV content. DC operation provides for flicker free light without residual ripple. Each light equipped with 161 selected white SMD LEDs. Lights can be dimmed separately or in conjunction. Incl. removable diffusing cover (5466). Lights can be tilted, swiveled and…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- Dark grey finished steel plate with die-cast base for KA4407, KA4475 or other R1 system columns. Receptacle for accessories (e.g. 5040) with 16 mm (0.6 in.) standard spigot, mounts on right or left side. Height adjustable feet. Dimensions (WxD): 45 x 45 cm (17.7 x 17.7 in.) Thickness of plate: 8 mm (0.3 in.) Weight: approx. 13.5 kg (29.7 lbs.) In combination together with…
- Read more
-
-
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- Daylight-type LED lighting unit with two PL 40D soft lights, each 40 watts, for even and soft illumination. Dimmable. Vertical arms with 20 x 20 mm (0.8 x 0.8 in.) cross section and strong cast aluminum clamp bases.
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- LED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination. The efficiency of LEDs is much higher than that of conventional light sources. However, because LEDs also convert energy into heat, a thermal management system is necessary for optimal reproducibility, as otherwise both brightness and color temperature would change as the temperature rises. The integrated…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- ED daylight lighting unit with thermo-management, consisting of two light banks for even and soft illumination. The efficiency of LEDs is much higher than that of conventional light sources. However, because LEDs also convert energy into heat, a thermal management system is necessary for optimal reproducibility, as otherwise both brightness and color temperature would change as the temperature rises. The integrated…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System, Stands: Components and Accessories
-
- Camera platform can be shifted horizontally to left or right and and can be blocked in any position. Adjustable stops for end position of camera. Camera can be mounted for horizontal or vertical format. Especially suitable for use with 5771 Book Holder when copying books page by page. Camera platform moves approx. 15 cm (6 in.) from center to each…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- on-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism. Column can be mounted rotated 180°. Base board: approx. 450…
- Read more
-
-
- Copy Stands and Lighting Equipment, R1 System
-
- Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism. Column can be mounted rotated 180°. Base board: approx. 450…
- Read more
